manualshive.com logo in svg

Brother MP-21C, Service Manual

Share
Download
Brother MP-21C Service Manual Download Page 173

CHAPTER 1 INTRODUCTION

1-3

  

Features

This printer has the following features:

❏

Small and Light InkJet Printer
This printer weighs about 1kg (2.2 lbs.) and the footprint is very
small. You can take the printer with you anywhere, any time you
want.

❏

Lowest Power Consumption in the World
Power consumption is so small (2.5-3.0 W: printing, 0.5 W: waiting )
that it is possible to take power from a Notebook PC through the
Printer Interface Card. Even if you use the AC adapter (MP-21CDX
or optional PA-21MP users only), it’s also easy to carry around.

❏

Quietest InkJet Printer in the World
The printer is so quiet (less than 40dBA), that the printer never
disturbs you while you are working.

❏

No need for an AC Adapter or Printer Cable
The printer can take power from the Notebook PC through the Printer
Interface Card. Therefore you do not have to carry an AC adapter and
a printer cable with you all the time.

❏

Brilliant 4 Color Output at 720 dpi
You can get wonderful output at 720 by 720 dpi resolution. When you
print on Brother special coated paper and glossy paper, you can get
excellent high resolution output.

❏

Two color print mode
When you select this mode through the printer driver, you can print
the color output in two colors. You can select Black/Cyan,
Black/Magenta or Black/Yellow.

❏

Low Running Cost
You don’t have to throw the print head of your printer away every
time you have emptied an ink cartridge. When you run out of ink, you
have to change only ink cartridges.

❏

Straight Paper Path
The printer can print on various types of paper - plain paper, coated
paper, glossy paper, transparencies, envelopes and organizers - with
fewer paper jams.

❏

Auto Cut Sheet Feeder (MP-21CDX or SF-21MP users only)
The Feeder is detachable.When using the Feeder, you can easily load
up to 30 sheets of paper.  When carried with the printer it fits on the
bottom of the printer and the total size including the printer is about
A4 size.

❏

AC Adapter and Parallel Interface Connector (MP-21CDX or PA-
21MP users only)
When you want to print faster, use the AC Adapter.
When you cannot print using the PC Card slot, use the Parallel
Interface Cable and AC adapter instead.

Summary of Contents for MP-21C










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands