![Brother mfc490w Quick Start Manual Download Page 3](http://html.mh-extra.com/html/brother/mfc490w/mfc490w_quick-start-manual_54443003.webp)
3
4
Install the ink cartridges
WARNING
If ink gets in your eyes, wash them out with
water at once, and if irritation occurs consult a
doctor.
a
Make sure that the power is turned on.
b
Open the ink cartridge cover.
c
Remove the green protective part.
d
Unpack the ink cartridge.
e
f
Take care to match the colour of the lever with
the cartridge colour.
g
Install each ink cartridge in the direction of the
arrow on the label.
h
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
5
Check the print quality
a
.
Press
Colour Start
.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press
1
(
Yes
)
on the dial pad to finish the quality check.
If you can see missing short lines, press
2
(
No
)
on the dial pad and go to
d
The LCD asks you if the print quality is OK for
black and colour. Press
1
(
Yes
) or
2
(
No
) on
the dial pad.
e
Press
1
(
Yes
), the machine will then start
cleaning the colours.
f
After cleaning is finished, press
Colour Start
.
The machine starts printing the Print Quality
Check Sheet again. Go back to
.
Set Paper and Press
Start