![background image](http://html.mh-extra.com/html/brother/mfc-j6920dw/mfc-j6920dw_service-manual_17375285.webp)
5-14
Confidential
1.3.6 Worker Switch Setting and Printout (Maintenance modes 10 and 11)
[ 1 ]
Worker switch setting (Maintenance mode 10)
< Function >
The worker switch functions (listed below) customize the machine to meet various
needs. They can be activated with the procedures using the control panel keys.
The worker switches have been configured at the factory in conformity to the
communications standards and codes of each country. Do not disturb them unless
necessary.
List of Worker Switches
WSW No.
Function
WSW01
Dial pulse setting
WSW02
Tone signal setting
WSW03
PABX mode setting
WSW04
TRANSFER facility setting
WSW05
1st dial tone and busy tone detection
WSW06
Redial/Pause
key setting and 2nd dial tone detection
WSW07
Dial tone setting 1
WSW08
Dial tone setting 2
WSW09
Protocol definition 1
WSW10
Protocol definition 2
WSW11
Busy tone setting
WSW12
Signal detection condition setting
WSW13
Modem setting
WSW14
AUTO ANS facility setting
WSW15
REDIAL facility setting
WSW16
Function setting 1
WSW17
Function setting 2
WSW18
Function setting 3
WSW19
Transmission speed setting
WSW20
Overseas communications mode setting
WSW21
TAD setting 1
WSW22
ECM and call waiting caller ID
WSW23
Communications setting
WSW24
TAD setting 2
WSW25
TAD setting 3
WSW26
Function setting 4
WSW27
Function setting 5
WSW28
Function setting 6
WSW29
Function setting 7
WSW30
Function setting 8
WSW31
Function setting 9
WSW32
Function setting 10
WSW33
Function setting 11
WSW34
Function setting 12
WSW35
Function setting 13
WSW36
Function setting 14
WSW37
Function setting 15
WSW38
V.34 transmission setting
WSW39
V.34 transmission speed
Summary of Contents for MFC-J6920DW
