Brother MFC-J4335DW, Online User'S Manual

Page: 120 / 635

Home > Scan > Scan Using the Scan Button on Your Machine > Scan to an Editable Text File Using OCR
Scan to an Editable Text File Using OCR
Your machine can convert characters in a scanned document to text using optical character recognition (OCR)
technology. You can edit this text using your preferred text-editing application.
• The Scan to OCR feature is available for certain languages.
• Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother iPrint&Scan.
>> MFC-J4335DW/MFC-J4345DW
>> MFC-J4535DW
MFC-J4335DW/MFC-J4345DW
1. Load your document.
2. Press ( SCAN ).
3. Press
a
or
b
to select the
[to PC]
option, and then press OK .
4. Press
a
or
b
to select the
[to OCR]
option, and then press OK .
5. If the machine is connected over the network, press
a
or
b
to select the computer where you want to send
data, and then press OK .
If the LCD message prompts you to enter a password, use the control panel to enter the password for the
computer, and then press
OK .
6. Do one of the following:
• To change the settings, go to the next step.
• To use the default settings, press Black Start or Color Start .
[Color Setting]
depends on the default settings. Pressing Black Start or Color Start does not allow
you to change the settings.
7. Press
a
or
b
to select the
[Scan Settings]
option, and then press OK .
To use the
[Scan Settings]
option, you must connect a computer with Brother iPrint&Scan installed to
the machine.
8. Press
a
or
b
to select the
[Set at Device]
option, and then press OK .
9. Select the scan settings you want to change, and then press OK .
Option Description
Color Setting
Select the scan color format of your document.
113