Brother MFC-J1010DW, Online User'S Manual

Page: 479 / 535

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the
Date and Time
Set the Date and Time
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to
each fax you send by setting your Station ID.
>> MFC-J1010DW/MFC-J1012DW
>> MFC-J1170DW
MFC-J1010DW/MFC-J1012DW
1. Press Settings .
2. Press
a
or
b
to make your selections:
a. Select
[Initial Setup]
. Press OK .
b. Select
[Date & Time]
. Press OK .
c. Select
[Date]
. Press OK .
3. Enter the last two digits of the year using the dial pad, and then press OK .
4. Enter the two digits for the month using the dial pad, and then press OK .
5. Enter the two digits for the day using the dial pad, and then press OK .
6. Press
a
or
b
to select
[Clock Type]
, and then press OK .
7. Press
a
or
b
to select
[12h Clock]
or
[24h Clock]
, and then press OK .
8. Press
a
or
b
to select
[Time]
, and then press OK .
9. To enter the time, do one of the following:
• If you selected
[12h Clock]
:
a. Press
a
or
b
to select
[AM]
or
[PM]
, and then press OK .
b. Enter the four digits of the time (in 12-hour format) using the dial pad, and then press OK .
• If you selected
[24h Clock]
:
Enter the four digits of the time (in 24-hour format) using the dial pad, and then press OK .
10. Press Stop/Exit .
MFC-J1170DW
1. Press
[Settings]
.
2. Press
[Date & Time]
.
3. Press
[Date]
.
4. Enter the last two digits of the year on the touchscreen, and then press
[OK]
.
5. Enter two digits for the month on the touchscreen, and then press
[OK]
.
6. Enter two digits for the day on the touchscreen, and then press
[OK]
.
7. Press
[Clock Type]
.
8. Press
[12h Clock]
or
[24h Clock]
.
9. Press
[Time]
.
10. To enter the time, do one of the following:
• If you selected
[12h Clock]
, enter the time (in 12-hour format) using the touchscreen, and then press
[AM]
or
[PM]
.
Press
[OK]
.
• If you selected
[24h Clock]
, enter the time (in 24-hour format) using the touchscreen.
Press
[OK]
.
473