Brother MFC-J1010DW Online User'S Manual Download Page 446

Page: 446 / 535

Home >

Routine Maintenance

Clean Your Brother Machine

> Clean the Outside of the Machine

Clean the Outside of the Machine

IMPORTANT

•

Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the machine.

•

DO NOT use cleaning materials that contain ammonia.

•

DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.

1. If the paper support flap is open, close it, and then close the paper support.
2. Pull the paper tray (1) completely out of the machine.

3. Wipe the outside of the machine with a dry, lint-free cloth to remove dust.

4. Lift the output paper tray cover and remove anything that is stuck inside the paper tray.

5. Wipe the inside and the outside of the paper tray with a dry, lint-free cloth to remove dust.

6. Close the output paper tray cover and slowly push the paper tray completely into the machine.

Related Information

•

Clean Your Brother Machine

440

Summary of Contents for MFC-J1010DW























































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J1010DW

Reviews:

Related manuals for MFC-J1010DW

Brands by name

Popular brands

Brother MFC-J1010DW, Online User'S Manual

Search results

Summary of Contents for MFC-J1010DW

Reviews:

Related manuals for MFC-J1010DW

Brands by name

Popular brands