manualshive.com logo in svg

Brother MFC 9600, Owner'S Manual

Share
Download
Brother MFC 9600 Owner'S Manual Download Page 181

22 - 7

T R O U B L E S H O O T I N G   A N D   R O U T I N E   M A I N T E N A N C E

Printing
or
Receiving
Faxes

If You Are Having Difficulty with Your MFC

If you think there is a problem with your MFC, make a copy first.
If the copy looks good, the problem is probably not your MFC.
Check the chart below and follow the troubleshooting tips.

Difficulty

Suggestions

Condensed Print and

If your copy looks good, you probably had a bad

Horizontal Streaks /

connection, with static or interference on the

Top and Bottom of

phone line. If the copy looks bad, call Brother

Sentences Are Cut Off. Customer Service at 1-800-284-4329 (USA),

1-800-853-6660 (from within Canada)
or 1-514-685-6464 (from within Montreal).

Vertical Black Lines

Sometimes you may see vertical streaks/black

When Receiving

lines on the faxes you receive.  Either your
machine’s primary corona wire for printing may
be dirty, or the sending party’s fax scanner may
be dirty.  Clean your primary corona wire (see
page 22-19), or ask the sender to make a copy to
see if the problem is with the sending machine.
Try receiving from another fax machine.
If the problem continues, call Brother Customer
Service at 1-800-284-4329 (USA),
1-800-853-6660 (from within Canada) or
1-514-685-6464 (from within Montreal).

MFC Does Not Answer Make sure the MFC is not in MANUAL mode.
When Called.

Check for dial tone. If possible, call your MFC

to hear it answer. If there is still no answer,
check the telephone line cord connection. If
there is no ringing when you call your MFC,
call your Telephone Company to check the line.

Poor Transmitting

Try changing your resolution to FINE or

Quality

SUPERFINE. Make a copy to verify
your MFC’s scanner operation.

Transmission

There is probably temporary noise or static on

Verification Report

the line. Try sending the fax again. If the

says “Result:NG”

problem continues, call the Telephone Company
to check your phone line.

Vertical Black Lines

If the copy you made shows the same problem,

When Sending

your scanner is dirty. (See Cleaning the Scanner
page 22-17.)

Transferring a Fax Call If you answered at an external or extension
to the MFC.

phone, press your Fax Receive Code (default
setting is  51). When your MFC answers, hang
up.

Phone Line
or
Connections

Sending
Faxes

Handling
Incoming
Calls

Summary of Contents for MFC 9600


































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands