Brother MFC-885CW, User Manual

Page: 45 / 203

Sending a fax
33
5
Faxing from the scanner glass
5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for colour faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a
Press ( Fax ).
b
Load your document face down on the
scanner glass. (See
Using the scanner
glass on page 11)
c
Enter the fax number using the dial pad
or Speed Dial.
Note
You can preview a fax message before
sending it by pressing
Fax Preview . For
details, see How to preview an outgoing
fax on page 68.
d
Press Mono Start or Colour Start .
„ If you press Mono Start , the
machine starts scanning the first
page. Go to step
e
.
„ If you press Colour Start , the
machine starts sending the document.
e
Do one of the following:
„ To send a single page, press 2 to
choose
No
(or press Mono Start again).
The machine starts sending the
document.
„ To send more than one page, press
1 to choose
Yes
and go to step
f
.
f
Put the next page on the scanner glass.
Press
OK .
The machine starts scanning the page.
(Repeat steps
e
and
f
for each
additional page.)
Faxing Letter size documents
from the scanner glass
5
When documents are Letter size, you need to
set Scan Size to Letter. If you do not, the side
portion of the faxes will be missing.
a
Press ( Fax ).
b
Press
a
or
b
to choose
Scan Size
.
c
Press
d
or
c
to choose
Letter
.
Note
You can save the setting you use most
often by setting it as default. (See
page 38.)
Colour fax transmission
5
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the memory.
When you send a colour fax, the machine will
send it in real time (even if
Real Time TX
is
set to
Off
).
Cancelling a fax in progress
5
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit .