Brother MFC-8440 User Manual Download Page 116

Page: 116 / 426

SETUP SEND

6 - 18

■

If the memory is full, press

Stop/Exit

to stop the job or if more

than one page has been scanned, press

Start

to send the

portion that is in the memory.

If it is not illuminated in green, press

(

Fax

). Place the

document face up in the ADF, or face down on the scanner
glass.

Enter a number using One-Touch, Speed-Dial, a Group
number, Search or manual dialling using the dial pad.

(Example: Group number)

When the LCD displays the fax number of the other party,
press

Set

You will be asked to press the next number.

Enter the next number.

(Example: Speed-Dial number)

When the LCD displays the fax number of the other party,
press

Set

Enter another fax number.

(Example: Manual dialling using the dial pad.)

Press

Start

If you are using the scanner glass, go to Step 8.

To send a single page, press

(or press

Start

again).

The MFC starts sending the fax.

—

To send more than one page, press

and go to Step 9.

Place the next page on the scanner glass.

Press

Set

The MFC starts scanning and returns to Step 8. (Repeat Step 8
and 9 for each additional page.)

Summary of Contents for MFC-8440











































































































































































































































































































































































































































Search results

Summary of Contents for MFC-8440

Reviews:

Brands by name

Popular brands

Brother MFC-8440, User Manual

Search results

Summary of Contents for MFC-8440

Reviews:

Brands by name

Popular brands