Brother MFC-8370DN User Manual Download Page 94

Page: 94 / 215

Chapter 12

To change the

default

setting follow the steps

below:

Press

Menu

Press

to make a lighter copy or press

to make a darker copy.

Press

Stop/Exit

Contrast

Adjust the contrast to help an image look
sharper and more vivid.

temporarily

change the contrast setting,

follow the steps below:

Make sure you are in Copy mode

Load your document.

Use the dial pad to enter the number of
copies (up to 99).

Press

Options

Press

to choose

Contrast

Press

to increase or decrease the

contrast.
Press

Press

Start

To change the

default

setting follow the steps

below:

Press

Menu

Press

to increase or decrease the

contrast. Press

Press

Stop/Exit

Making N in 1 copies
(page layout)

You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.

IMPORTANT

• Please make sure the paper size is set to

Letter

Legal

Folio

• (

) means Portrait and (

) means

Landscape.

• You cannot use the Enlarge/Reduce

setting with the N in 1 feature.

Make sure you are in Copy mode

Load your document.

Use the dial pad to enter the number of
copies (up to 99).

Press

Options

Press

to choose

Page Layout

Press

to choose

2 in 1 (P)

2 in 1 (L)

4 in 1 (P)

4 in 1 (L)

Off(1 in 1)

Press

Start

to scan the page.

If you placed the document in the ADF,
the machine scans the pages and starts
printing.

If you are using the scanner glass, go
to step

After the machine scans the page,
press

to scan the next page.

Next Page?
1.Yes 2.No

Summary of Contents for MFC-8370DN
























































































































































































































Search results

Summary of Contents for MFC-8370DN

Reviews:

Brands by name

Popular brands

Brother MFC-8370DN, User Manual

Search results

Summary of Contents for MFC-8370DN

Reviews:

Brands by name

Popular brands