Brother MFC-8370DN, User Manual

Page: 47 / 215

Sending a fax
37
5
Changing a 2-sided fax layout
You need to choose the duplex scanning
format before you send a fax. The format you
choose will depend on the layout of your
2-sided document.
a
Press Menu , 1 , 9 , 3 .
b
Do one of the following:
„ If your document is flipped on the
Long edge, press
a
or
b
to choose
Long edge
.
Press OK .
„ If your document is flipped on the
Short edge, press
a
or
b
to choose
Short edge
.
Press OK .
c
Press Stop/Exit .
Sending a fax from the
scanner glass
5
You can use the scanner glass to fax the
pages of a book, or a single page at a time.
The documents can be Letter or A4 size.
Press
Stop/Exit to cancel a fax in progress.
a
Make sure you are in Fax mode .
b
Place your document face down on the
scanner glass.
c
Dial the fax number. (See How to dial
on page 62.)
d
Press Start .
The machine starts scanning the first
page.
e
After the machine scans the page, the
LCD will prompt you to choose one of
the options below:
Next Page?
1.Yes 2.No(Send)
„ Press 1 to send another page.
Go to step
f
.
„ Press 2 or Start to send the
document. Go to step
g
.
f
Place the next page on the scanner
glass, press
OK . Repeat steps
e
and
f
for each additional page.
Set Next Page
Then Press OK
g
Your machine will automatically send
the fax.
Note
When faxing multiple pages from the
scanner glass, real time transmission
should be set to
Off
. (See Real Time
Transmission on page 42.)
Long edge
Portrait Landscape
Short edge
Portrait Landscape