Brother MFC-8370DN, User Manual

Page: 36 / 215

Chapter 3
26
LCD Contrast
3
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu , 1 , 7 .
b
Press
b
to make the LCD lighter. Or,
press
a
to make the LCD darker.
Press OK .
c
Press Stop/Exit .
Dial prefix
3
The dial prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number
3
a
(for New Zealand) Press Menu , 0 , 5 .
Press Menu , 0 , 6 .
b
Enter the prefix number (up to 5 digits)
on the dial pad.
Press
OK .
Note
• You can use the numbers 0 to 9, #, l and !.
(Press Hook to display “!”.)
You cannot use ! with any other numbers
or characters.
If your telephone system requires a timed
break recall (hookflash), press
Hook to
enter the break.
• (Not available in New Zealand) If the pulse
dialing mode is on, # and
l
are not
available to use.
c
Press Stop/Exit .
Changing the prefix number
3
a
(for New Zealand) Press Menu , 0 , 5 .
Press Menu , 0 , 6 .
b
Do one of the following:
„ To change the prefix number, press
1 .
„
To exit without making a change,
press
2 and go to
d
.
c
Enter a new prefix number using the dial
pad (up to 5 digits).
Press
OK .
d
Press Stop/Exit .