LK3-B430E Mark II
40
5. ASSEMBLY
10 N
!7
!8
!5
A
!4
!6
o
!9
!3
y
t
u
!2
!1
r
e
w
i
!0
5-14. Covers
1. Attach the V belt
q
.
2. Attach the the shuttle race cover
r
using the shoulder screw
w
and the washer
e
.
3. Attach the eye guard
t
and the face plate
y
using the screws
u
.
4. Attach bed covers (R)
i
and (L)
o
using the screws
!0
.
5. Temporarily attach the top cover
!1
using the screw
!2
.
6. Provisionally install the tension pulley
!3
with the flat washer
!4
, spring washer
!5
and bolt
!6
.
* Adjust the belt tension by moving the tension pulley to the right and left so that there is 9 - 10 mm of
deflection in the V-belt
q
when it is gently pushed in the middle with a force of approximately 10 N.
* After adjusting, tighten the bolt
b
to secure the left pulley assembly. Move the right tension pulley so
that there is a gap of about 1 mm between it and the V-belt
q
, and then tighten the bolt
c
to secure the
right pulley assembly.
7. Attach the belt cover
!7
while inserting part
A
into the top cover
!1
, and tighten the screws
!8
and
!9
.
8. While lightly pressing the top of the belt cover
!7
in the direction of the arrow, tighten the screw
!2
.
Approx. 9 - 10 mm
r
b
c
Approx. 1 mm
