www.homemediaonline.co.uk
www.refillablecartridges.co.uk
www.edibleinks.co.uk
www.dyesubstuff.co.uk
CLEANPRINT & No Fade Inks are products of:
www.craftmedia.co.uk
Home Media 27 Sutton Road, Howden, East Yorks. DN14 7DJ
www.cartridgeoutlet.co.uk
Tel: 0845 3096375
e-mail: [email protected]
www.beaglesink.co.uk
www.photos2canvasprints.co.uk
Re-Fillable Ink/Cleaning cartridges -
Instructions for use:
Brother LC123 Cartridges - See Page 2 on Fittings Enclosed with your cartridges
We remove the air bungs which reveal your air vent before you receive your cartridges. This is to avoid
mistakes, as leaving these in the cartridges will prevent ink being released.
If we have supplied you the cartridges with the clear rubber bungs inserted, please remove them.
For First Use
1 Remove coloured stoppers and fill with ink
2. Place all cartridges in your printer in the order that your printer requests.
3. Ensure that all cartridges are clicked firmly in place.
4. Run head cleaning utilty to charge the cartridges.
5. If the cartridges do not recognise immediately,
a. Remove cartridges from your printer
b. Switch printer off/remove power lead and USB lead for approx 2 minutes.
c. Plug the power lead and USB lead back in the printer and switch printer back on
d. Place refillable cartridges in your printer in the order hat your printer requests.
e. If you experience broken lines in your printing
pull out coloured stoppers to release valve,
replace when problem clears.
(You may need to repeat this process to reset the printer
firmware after re-filling your cartridges)
Please Tel 0845 3096375 or visit our websites for
For Re-Filling
re-supply of ink or cartridges
1. Remove cartridge from printer
2. Remove coloured stoppers from cartridge, and re-fill
3. Place cartridge in printer and run head clean utility.
4. Only refill the cartridge that the printer has advised is empty,
to refill all cartridges may confuse your printer firmware.
(If this happens repeat steps b to d)
Notes, Tips & Tricks
1. Please monitor your ink levels in your cartridges as it is not possible for the printer utility program
to show the exact volume of ink in the cartridges as the firmware is set to recognise single use only cartridges.
2. Please ensure that you print using the paper settings for matte/inkjet or gloss and set to high quality.
We would suggest you use these settings even when you are printing on PLAIN paper.
3. To clear a minor blocked head, try printing our test sheet which can be found on www.printingbuddy.co.uk
Please Note: Cartridge Designs & Stopper locations can vary between models
