Brother IntelliFAX 2480C User Manual Download Page 79

Page: 79 / 164

Remote fax options (Black & White only)

Turning off Remote Fax
Options

Press

Menu

1.Fwd/Page/Store

Press

to choose

Off

Press

Note

The LCD will give you options if there are
received faxes still in your machine’s
memory. (See

Changing Remote Fax

Options

on page 63.)

Press

Stop/Exit

Changing Remote Fax
Options

If received faxes are left in your machine’s
memory when you change to another remote
fax option, the LCD will ask you the following
message:

Erase All Fax?

1.Yes 2.No

Print All Fax?

1.Yes 2.No

If you press

, faxes in the memory will be

erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.

If you press

, faxes in the memory will not

be erased or printed and the setting will be
unchanged.

Summary of Contents for IntelliFAX 2480C





































































































































































Search results

Summary of Contents for IntelliFAX 2480C

Reviews:

Related manuals for IntelliFAX 2480C

Brands by name

Popular brands

Brother IntelliFAX 2480C, User Manual

Search results

Summary of Contents for IntelliFAX 2480C

Reviews:

Related manuals for IntelliFAX 2480C

Brands by name

Popular brands