Brother IntelliFAX 2480C User Manual Download Page 119

Page: 119 / 164

Troubleshooting and Routine Maintenance

103

Put the Jam Clear Cover back on.
Make sure the cover is set properly.

Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover (1) until it locks securely
into the open position.
Make sure that there is no jammed
paper left in the corners of the machine.

Note

If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.

Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).

Push the paper tray firmly back into the
machine.

Note

Make sure you pull out the paper support
until it clicks.

Dial Tone

Setting the dial tone to Detection will shorten
the dial detect pause.

Press

Menu

Press

to choose

Detection

No Detection

Press

Stop/Exit

Summary of Contents for IntelliFAX 2480C





































































































































































Search results

Summary of Contents for IntelliFAX 2480C

Reviews:

Related manuals for IntelliFAX 2480C

Brands by name

Popular brands

Brother IntelliFAX 2480C, User Manual

Search results

Summary of Contents for IntelliFAX 2480C

Reviews:

Related manuals for IntelliFAX 2480C

Brands by name

Popular brands