Brother Innov-is, Installation Manual

Page: 4 / 76

2
Accessories
The following items are included with your purchase.
Please verify all contents and if anything is missing or
damaged, contact your authorized dealer.
• CD-ROM (For details regarding contents, refer to
the following.)
• Installation Guide (this guide)
In addition, this kit contains the pen tablet to expand
the operation of your sewing machine. This pen tablet
is designed to be used when creating your original
embroidery pattern using the My Custom Design.
• Pen tablet
For details on using the pen tablet, see
“Operation Manual” and “My Custom Design
Operation Manual” viewable from the disc.
Contents of CD-ROM
• Certification Key Issuing Wizard
• Upgrade KIT
II
Operation Manual (PDF)
* Adobe Reader is required for viewing and printing the
Operation Manual.
• Upgrade application for KIT
II
• “My Custom Design” start-up file
<MyCustom.rp7>
• My Custom Design Operation Manual (PDF)
• 10 embroidery patterns
Installation Overview
First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a Certification Key. Then,
use the CERTIFICATION key within the Settings screen,
page 5, to activate the upgrade application for KIT
II
on
the sewing machine.
In the procedures section, indicates operations
performed with the sewing machine and
indicates operations performed with the computer.
[Step 1] Make a note of the internal
machine identification number (No.).
[Step 2] Insert the CD-ROM into the
computer’s CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard instructions
for obtaining the Certification Key.
[Step 4] Install the upgrade application
for KIT
II
on the sewing machine.
[Step 5] Remove the USB media, and
turn the machine off and then on again.
[Step 6] After the upgrade has been
successfully installed, certify the “KIT
II
”
in the Settings screen of the sewing
machine.
Note
• For details on proper use of the included
accessories see the Operation Manual viewable
from the disc by clicking on the “manual” folder and
selecting your preferred language.
You may also view the Operation Manual by clicking
on the “manual_index.pdf” icon contained within the
disc and selecting either file listed to the side of your
preferred language.
Note
• Upgrade application data is contained in the
“NV6000D(USA)”, “NV6000D(CAN)” or “NV1” folder.
Select the appropriate folder for your model.
• When using “My Custom Design” software, copy the
start-up file to your USB media and connect media
to your sewing machine. For details on using “My
Custom Design” software, see “My Custom Design
Operation Manual” viewable from the disc.