Brother Innov-is NX600 Operation Manual Download Page 23

Page: 23 / 159

GETTING READ

CONTENTS

SEWING BASICS

ITCHES

APPENDIX

INDEX

Changing the Machine Settings

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Changing the screen language

The language used in the screens that are displayed
can be changed to one of the many available.

Press

(Settings key) in the operation panel,

and then press

and (Arrow keys)

until

selected.

Press

(OK key).

The screen for changing the language of the
screens appears.

Press

or until the desired language is

selected.

The language can be changed to one of the
available: English, French, German, Dutch,
Spanish, Italian, Danish, Norwegian, Finnish,
Swedish, Portuguese, Russian, Japanese,
Korean or others.

The language of the screens is changed.

Press

(OK key).

The initial stitch screen appears again.

Summary of Contents for Innov-is NX600
































































































































































Search results

Summary of Contents for Innov-is NX600

Reviews:

Related manuals for Innov-is NX600

Brands by name

Popular brands

Brother Innov-is NX600, Operation Manual

Search results

Summary of Contents for Innov-is NX600

Reviews:

Related manuals for Innov-is NX600

Brands by name

Popular brands