GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
46
Removing and attaching the
presser foot holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
embroidery foot and quilting foot. Use the
screwdriver to remove the presser foot holder.
a
Remove the presser foot.
• For details, refer to “Replacing the presser
foot” (page 44).
b
Use the screwdriver to loosen the presser foot
holder screw.
a
Screwdriver
b
Presser foot holder
c
Presser foot holder screw
■
Attaching the presser foot holder
a
Raise the presser foot lever.
b
Align the presser foot holder with the lower-
left side of the presser bar.
c
Hold the presser foot holder in place with your
right hand, and then tighten the screw using
the screwdriver in your left hand.
a
Screwdriver
Note
z
If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
a
b
c
1
Summary of Contents for Innov-is 1250D
