Brother HL-L6400DW Online User'S Manual Download Page 296

Page: 296 / 382

Home >

Routine Maintenance

Replace Supplies

> Reset the Drum Counter

Reset the Drum Counter

When you replace the drum unit with a new one, you must reset the drum counter by completing the following
steps:

IMPORTANT

DO NOT reset the drum counter unless you are replacing the drum unit.

>> HL-L6250DW
>> HL-L6400DW/HL-L6400DWT

HL-L6250DW

1. Make sure the machine is turned on.
2. Open the front cover.

3. Press and hold

for about two seconds to display the

[Drum Unit]

option, and then press

4. Press

for

[Reset]

to reset the drum counter.

5. Close the front cover of the machine.

HL-L6400DW/HL-L6400DWT

1. Make sure the machine is turned on.

2. Press

[Settings]

[Machine Information]

[Parts Life]

3. Press and hold

[Drum Life]

4. Press

[Yes]

5. Press

Related Information

•

Replace Supplies

•

Replace the Drum Unit

291

Summary of Contents for HL-L6400DW






























































































































































































































































































































































































Search results

Summary of Contents for HL-L6400DW

Reviews:

Brands by name

Popular brands

Brother HL-L6400DW, Online User'S Manual

Search results

Summary of Contents for HL-L6400DW

Reviews:

Brands by name

Popular brands