Level 1
Level 2
Level 3
Level 4
Descriptions
Wi-Fi
Direct
Status Info.
Speed
-
Display the connection speed when the
Status
is
G/O Active
or
Client Active
.
I/F Enable
-
-
Enable or disable the Wi-Fi Direct connection.
Network
Reset
-
-
-
Restore all network settings of your machine to
the factory settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Network]
(HL-L2370DN)
Level 1
Level 2
Level 3
Description
TCP/IP
Boot Method
-
Choose the IP method that best suits your needs.
IP Address
-
Enter the IP address.
Subnet Mask
-
Enter the Subnet mask.
Gateway
-
Enter the Gateway address.
Node Name
-
Enter the Node name.
WINS Config
-
Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary WINS server.
Secondary
Specify the IP address of the secondary WINS server.
DNS Server
Primary
Specify the IP address of the primary DNS server.
Secondary
Specify the IP address of the secondary DNS server.
APIPA
-
Allocate the IP address from the link-local address range
automatically
.
IPv6
-
Enable or disable the IPv6 protocol.
Ethernet
-
-
Choose the Ethernet link mode.
Wired Status
-
-
Display the Ethernet link status.
MAC Address
-
-
Display the MAC address of the machine.
Network Reset
-
-
Restore all network settings of your machine to the factory settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Network]
(HL-L2375DW/HL-L2376DW/HL-L2385DW/HL-L2386DW)
Level 1
Level 2
Level 3
Level 4
Descriptions
Wired LAN
TCP/IP
Boot Method
-
Choose the IP method that best suits your
needs.
IP Address
-
Enter the IP address.
Subnet Mask
-
Enter the Subnet mask.
Gateway
-
Enter the Gateway address.
Node Name
-
Enter the Node name.
WINS Config
-
Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary WINS
server.
Secondary
Specify the IP address of the secondary WINS
server.
239
Summary of Contents for HL-L2310D
