manualshive.com logo in svg

Brother HL-B2000D, Online User'S Manual

Share
Download
Brother HL-B2000D Online User'S Manual Download Page 135

 Home > 

Troubleshooting

 > 

Paper Jams

 > Paper is Jammed inside the Machine

Paper is Jammed inside the Machine

If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these
steps:
1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the

machine.

2. Open the front cover.

3. Remove the toner cartridge and drum unit assembly.

  WARNING

HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching
them.

4. Pull out the jammed paper slowly.

5. Install the toner cartridge and drum unit assembly into the machine.

6. Close the front cover.

  Related Information

•

Paper Jams

 

131

Summary of Contents for HL-B2000D
















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands