Troubleshooting
173
15
3 Double-click the
Terminal
icon.
4 Try pinging the print server from the Terminal window:
ping ipaddress
Where
ipaddress
is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
e
If you have tried
above and it does not work, then reset the print server back to its factory default
settings and try from the initial setup again. For resetting, see
Reset the network settings to the factory
f
If the installation failed, the Firewall on your computer may be blocking the necessary network
connection to the machine. In this case, you will need to disable the Firewall on your computer and
re-install the drivers. For more information, see
on page 169. If you are using personal
Firewall software, see the
User’s Guide
for your software or contact the software manufacturer.
