manualshive.com logo in svg

Brother HL 5370DW, Network User'S Manual

The Brother HL 5370DW is a high-performance network-ready printer. Enhance your printing experience with the comprehensive Network User's Manual, available for free download at manualshive.com. This manual offers detailed instructions and troubleshooting tips to ensure seamless connectivity and optimal performance. Get your manual now and unleash the printer's full potential.

Share
Download
background image

Security features

145

14

Managing your network printer securely

14

To manage your network printer securely, you need to use the management utilities with security protocols.

Secure Management using Web Based Management (web browser)

14

We recommend to use HTTPS and SNMPv3 protocol for secure management. To use the HTTPS protocol, 
the following printer settings are required.

„

A certificate and private key must be installed in the printer. For how to install a certificate and private key, 
see 

Creating and installing a certificate

 on page 152.

„

The HTTPS protocol must be enabled. To enable the HTTPS protocol, enable 

SSL communication is 

used

 

(port 443)

 from the 

Advanced Setting

 page of 

Web Based Management

 

(Web Server)

 on the 

Configure Protocol

 page. For information on how to access the 

Configure Protocol

 page, see 

Configuring the protocol settings

 on page 144.

Note

 

• We recommend Microsoft

®

 Internet Explorer

®

 6.0 (or greater) or Firefox 1.0 (or greater) for Windows

®

 

and Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always 
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with 
HTTP 1.0 and HTTP 1.1. To use a web browser, you will need to know the IP address of the print server.

• We recommend to disable the Telnet, FTP and TFTP protocols. Accessing the machine using these 

protocols is not secure. See 

Configuring the protocol settings

 on page 144.

 

a

Start your web browser.

b

Type “

https://Common Name/

” into your browser. (Where “

Common Name

” is the Common Name 

that you assigned for the certificate, such as an IP address. For how to assign a Common Name for the 

certificate, see 

Creating and installing a certificate

 on page 152.)

„

For example:

https://192.168.1.2/

 (if the Common Name is the printer’s IP address)

Note

 

• If you have edited the hosts file on your computer or are using a Domain Name System, you can also 

enter the DNS name of the print server.

• For Windows

®

 users, as the print server supports TCP/IP and NetBIOS names, you can also enter the 

NetBIOS name of the print server. The NetBIOS name can be seen on the Printer Settings Page. To 
learn how to print the Printer Settings Page, see 

Printing the Printer Settings Page

 on page 117. The 

NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as 
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network.

 

Summary of Contents for HL 5370DW












































































































































































































Reviews:

No comments

Related manuals for HL 5370DW

Olympus P 400 Owner'S Manual preview
P 400
Brand: Olympus Pages: 71
Canon imagePRESS Server G200 Service Manual preview
imagePRESS Server G200
Brand: Canon Pages: 82
Canon P 400 Service Manual preview
P 400
Brand: Canon Pages: 88
Canon imagePROGRAF iPF8300S Basic Manual preview
imagePROGRAF iPF8300S
Brand: Canon Pages: 52
Canon i250 Series Specification preview
i250 Series
Brand: Canon Pages: 2
Oki B2200 Setup Manual preview
B2200
Brand: Oki Pages: 24
VAF instruments 247 Technical Manual preview
247
Brand: VAF instruments Pages: 24
Xerox Phaser 6250DP Setup Manual preview
Phaser 6250DP
Brand: Xerox Pages: 2
Xerox Phaser 6280N Evaluator Manual preview
Phaser 6280N
Brand: Xerox Pages: 16
Xantech XMUSICWP User Manual preview
XMUSICWP
Brand: Xantech Pages: 52
Watchguard Firebox M470 Hardware Manual preview
Firebox M470
Brand: Watchguard Pages: 32
KYLAND SICOM3005A Hardware Installation Manual preview
SICOM3005A
Brand: KYLAND Pages: 30
Sun Microsystems Netra ft 1800 Installation Manual preview
Netra ft 1800
Brand: Sun Microsystems Pages: 90
A&D AD-8127 Instruction Manual preview
AD-8127
Brand: A&D Pages: 31
Xerox 8200DX - Phaser Color Solid Ink Printer Manual preview
8200DX - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 2
EFI Pro 32r Operation Manual preview
Pro 32r
Brand: EFI Pages: 168
Oce VarioPrint 4110 User Manual preview
VarioPrint 4110
Brand: Oce Pages: 216
ANTAIRA STW-611C Installation Manual preview
STW-611C
Brand: ANTAIRA Pages: 2

Brands by name

Popular brands

Load more brands