Brother HL-4150CDN User Manual Download Page 101

Page: 101 / 341

Replacing a Toner cartridge

Order No. For the Order No. of toner
cartridges, see

The Standard toner cartridges can print
approximately 2,500 pages (black) or
approximately 1,500 pages (cyan, magenta,
yellow)

. The High Yield toner cartridges can

print approximately 6,000 pages (black) or
approximately 3,500 pages (cyan, magenta,
yellow)

. Actual page count will vary

depending on your average type of
document. When a toner cartridge is running
low, the LCD shows

Toner Low

The toner cartridges that come supplied with
the machine are standard toner cartridges.

Approx. cartridge yield is declared in accordance
with ISO/IEC 19798.

Note

• It is a good idea to keep a new toner

cartridge ready for use when you see the

Toner Low

warning.

• To ensure high quality printing, we

recommend that you use only Genuine
Brother Brand toner cartridges. When you
want to buy toner cartridges, please call
Brother Customer Service.

• We recommend that you clean the

machine when you replace the toner
cartridge. See

Cleaning and Checking the

machine

Appendix A

of the

Advanced

User's Guide

• If you change the print density setting for

lighter or darker printing, the amount of
toner used will change.

• Wait to unpack the toner cartridge until

immediately before you put it into the
machine.

Toner Low

If the LCD shows

Toner Low

Prepare New Toner Cartridge.X

, buy

a new toner cartridge and have it ready
before you get a

Replace Toner

message.

The LCD indicates the toner color that is near
the end of its life (Cyan, Magenta, Yellow or
Black).

Replace Toner

When the LCD shows

Replace Toner

the

machine will stop printing until you replace
the toner cartridge. The message on the LCD
will indicate which color you need to replace.

A new or unused genuine Brother toner
cartridge will reset the Replace Toner mode.

Summary of Contents for HL-4150CDN






















































































































































































































































































































































Search results

Summary of Contents for HL-4150CDN

Reviews:

Brands by name

Popular brands

Brother HL-4150CDN, User Manual

Search results

Summary of Contents for HL-4150CDN

Reviews:

Brands by name

Popular brands