Brother HL-4040CDN - Color Laser Printer User Manual Download Page 55

Page: 55 / 211

Driver and Software

Using the custom monochrome printer driver (for Windows

)

You can install a windows

printer driver that will restrict printing to monochrome only.

If you want to install the Windows

printer driver that will restricted color printing, choose

Custom setup

from

Install Printer Driver

selection on the menu screen of the supplied CD-ROM. After accepting the software

license and the initial installation screens, follow the steps below when the Select Components screen
appears.

Choose

PCL Driver

and any other Components you wish to install and click the

Settings

button.

Note

If you are using the HL-4040CN, the PCL driver will automatically be selected.

Check the

Enable

box for

Restrict Color Printing

and enter a password in the

Password

box and

Confirm Password

box. Then click

Note

• The password must be between 5 and 25 characters.

• You can unlock the restrict color printing setting by using the

Color/Mono Lock

feature of the printer

driver. (See the

Administrator

selection of

Device Options

on page 41.) To unlock the driver for color

printing, you will need the password you set at step

Summary of Contents for HL-4040CDN - Color Laser Printer




















































































































































































































Search results

Summary of Contents for HL-4040CDN - Color Laser Printer

Reviews:

Related manuals for HL-4040CDN - Color Laser Printer

Brands by name

Popular brands

Brother HL-4040CDN - Color Laser Printer, User Manual

Search results

Summary of Contents for HL-4040CDN - Color Laser Printer

Reviews:

Related manuals for HL-4040CDN - Color Laser Printer

Brands by name

Popular brands