Brother HL-3160CDW Online User'S Manual Download

Page: 229 / 319

> Network Reset

Network Reset

Use the Network Reset function to restore the print server's network settings, such as password and IP address,
back to its default factory settings.

•

Unplug all the interface cables before you perform a Network Reset.

>> HL-3160CDW
>> HL-3190CDW

HL-3160CDW

1. Press

to select the

[Initial Setup]

option, and then press

2. Press

to select the

[Reset]

option, and then press

3. Press

to select the

[Network Reset]

option, and then press

4. Press

to select

[Reset]

5. Press

to restart the machine.

HL-3190CDW

1. Press

[Settings]

[All Settings]

[Initial Setup]

[Reset]

[Network Reset]

2. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the

process.

Option

Description

Press

Yes

for 2 seconds Reboot the machine. The machine will begin the reset.

The machine will exit without rebooting.

If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.

3. Press

Related Information

•

Reset Functions

225

Summary of Contents for HL-3160CDW
































































































































































































































































































































Search results

Summary of Contents for HL-3160CDW

Reviews:

Related manuals for HL-3160CDW

Brands by name

Popular brands

Brother HL-3160CDW, Online User'S Manual

Search results

Summary of Contents for HL-3160CDW

Reviews:

Related manuals for HL-3160CDW

Brands by name

Popular brands