manualshive.com logo in svg

Brother HL-1210WE, User Manual

Share
Download
Brother HL-1210WE User Manual Download Page 45

General Information 

38

3

The LED indications shown in the table below are used in the illustrations in this chapter.

 

LED is off.

 or 

LED is on.

 

LED is dimmed.

 or 

LED is blinking.

LEDs

Machine Status

 

Sleep

The machine is in Sleep Mode (Power Save mode). While the machine is in Sleep Mode, the 

Ready

 LED 

( ) is dimmed, but the machine can still receive data. Receiving a print job will automatically wake up 
the machine to start printing.

For more information, see 

Sleep Time

 on page 45.

Deep Sleep

The machine is in Deep Sleep Mode, and uses less power than Sleep mode. While the machine is in 
Deep Sleep Mode, the 

Ready

 LED ( ) is dimmed, but the machine can still receive data. Receiving a 

print job will automatically wake up the machine to start printing.

For more information, see 

Deep Sleep mode

 on page 45.

 

Ready

The machine is ready to print.

 

Printing

The machine is printing.

The 

Ready

 LED ( ) will blink at 0.5 second intervals.

Please Wait

The machine is warming up.

The 

Ready

 LED ( ) will blink at 1 second intervals.

Cooling Down

The inside of the machine is extremely hot. The machine will pause its current print job and go into 
Cooling Down mode. Wait until the machine is in Ready mode.

The 

Ready

 LED ( ) will blink at 1 second intervals.

Receiving Data

The machine is either receiving data from the computer or processing data in the memory.

The 

Ready

 LED ( ) will blink at 0.5 second intervals.

Summary of Contents for HL-1210WE
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands