Brother HL-1112 User Manual Download Page 42

Page: 42 / 73

Control panel

LEDs (Light Emitting Diodes)

This section refers to two LEDs and one key on the control panel.

Power On/Off

You can turn the machine on and off.

Press and hold down

to turn the machine on.

Press and hold down

to turn the machine off. All the LEDs turn off when you enable the Power Off

mode.
Also, you can use the following functions:
1 Job Cancel / All Jobs Cancel
Error recovery / Form feed
For details, see

Power On/Off key

on page 41

2 Error LED ( )

The

Error

LED ( ) indicates that the machine is in error state.

Also, the

Error

LED ( ) indicates the kind of error in combination with other LEDs.

3 Ready LED ( )

The

Ready

LED ( ) will blink depending on the machine status.

The LED indications shown in the table below are used in the illustrations in this chapter.

General Information

LED is off.

LED is on.

LED is dimmed.

LED is blinking.

Summary of Contents for HL-1112










































































Search results

Summary of Contents for HL-1112

Reviews:

Related manuals for HL-1112

Brands by name

Popular brands

Brother HL-1112, User Manual

Search results

Summary of Contents for HL-1112

Reviews:

Related manuals for HL-1112

Brands by name

Popular brands