24
Chapter 3
Manual Reception (Manual Mode)
When you set the Receive Mode to manual (the
Fax
and
F/T
lights are both off), you must answer
each incoming call yourself with an external telephone. Select this mode by pressing
Mode
key.
Here is what you should do when using Manual Mode:
Setting the Ring Delay
The Ring Delay setting determines the number of times the machine rings before it answers in FAX
ONLY or FAX/TEL mode. (See
Operation from an External or Extension Telephone
1
Press
Menu
,
2
,
1
,
1
.
2
Press
or
to select how many times the line rings before the machine answers (02-10 for
Australia, 01-10 for New Zealand, 00-10 for some countries).
3
Press
Set
when the screen displays your selection.
4
Press
Stop/Exit
.
Setting the F/T (Fax/Tel) Ring Time (Fax/Tel Mode Only)
You need to determine how long the machine will notify you with its special F/T pseudo-ring when
you have a voice call. This ringing happens after the initial ringing from the phone company. Only
the machine rings, for 20, 30, 40 or 70 seconds (20, 30, 40, or 55 seconds for New Zealand); no other
phones on the same line ring the special F/T pseudo-ring. However, you can answer the call on any
extension phone (in a separate wall socket) on the same line as the machine. (See
External or Extension Telephone
1
Press
Menu
,
2
,
1
,
2
.
2
Press
or
to select how long the machine will ring to alert you that you have a voice call,
and then press
Set
.
3
Press
Stop/Exit
.
Now, when a call comes in and the machine is set to Fax/Tel (F/T) Mode, all phones on this line will
ring the number of times you selected in Ring Delay.
You can let the machine pick up and detect if it’s a fax or voice call. If it’s a fax call, the machine
prints the fax. If it’s a voice call, the machine signals you with an F/T pseudo-ring for the length of
time you selected in F/T Ring Time. Lift the external telephone’s handset, and then press
Hook
to
answer.
If You Get a...
Then You Should...
1.
Regular phone call
Talk as you normally would.
2.
Phone call and request to
send a fax
Press
Fax Start
when finished talking, and replace the
external telephone’s handset.
NOTE
: Sender must also press Start.
3.
Fax tone...
Wait until the fax machine takes over the call or press
Fax Start
.
Summary of Contents for FAX-8360P
Page 1: ...FAX 8360P OWNER S MANUAL ...