Brother FAX-8360P, Owner'S Manual

Page: 33 / 126

B
ASIC F
AX USE
Receiving a Fax
23
3
Receiving a Fax
Receive Mode Settings
Select Receive Mode
There are four different receive modes for the machine. You may choose the mode
that best suits your needs by pressing the
Mode key repeatedly until you have
changed the Fax and F/T lights to the setting you want to use.
You will need to connect an external telephone to select Fax/Tel (F/T) or Manual
Mode or an external TAD to select TAD Mode.
Receive Mode For
( means light off. means light on.)
1. FAX Use this function if you want to receive fax messages only (no
telephone calls). The machine should be connected on its own
line. The machine automatically answers every call as a fax
call. You cannot receive a voice call, but, if you have
connected an External telephone, you can still dial out and
make voice calls. (This setting is recommended if the machine
is on its own dedicated line.)
2. FAX/TEL ( F/T )
(with an External
Telephone)
Use this function if you expect to receive many fax messages
and few phone calls. The machine automatically answers
every call. If the call is a fax, it prints the fax. If the call is not
a fax, it signals you with an F/T pseudo-ring, different from the
phone company ringing, to alert you to pick up the call. Lift the
external telephone’s handset, and then press
Hook to answer.
If you select this setting, you will need to set the Ring Delay
and F/T Ring Time features (on the following pages).
3. TAD
(with an External
Answering
Machine)
This is the only setting in which you can use an external
answering machine . Your telephone answering device
answers every call. Once the external telephone answering
device (TAD) answers, the machine listens for fax tones. If it
detects fax tones, fax messages are printed. (See
Connecting
an External Telephone Answering Device (TAD) , page 5.)
The TAD setting works only with an external telephone answering device (TAD). Ring Delay
and F/T Ring Time do not work in this setting.
4. MANUAL
(with an External
Telephone)
Use this function if you receive many telephone calls and few
fax messages. You must answer all calls yourself. If you hear
fax tones, wait until the machine takes over the call
automatically, then hang up (see Fax Detect function).
TAD
Fax
F/T
TAD
Fax
F/T
TAD
Fax
F/T
TAD
Fax
F/T