Brother FAX-615, Service Manual

Page: 111 / 123

V – 59
Function Setting and Specifications
No. 1 2 3
0 0 0 : -47.0 dBm (A)
0 0 1 : -48.5 dBm (B)
0 1 0 : -50.0 dBm (C)
0 1 1 : -51.5 dBm (D)
1 0 0 : -53.0 dBm (E)
1 0 1 : -54.5 dBm (F)
1 1 0 : -56.0 dBm (G)
1 1 1 : OFF (H)
WSW29
(Function setting 7)
Selector
No.
1
2
3
4
5
6
No. 4 5 6
0 0 0 : -44.0 dBm (A)
0 0 1 : -45.0 dBm (B)
0 1 0 : -47.0 dBm (C)
0 1 1 : -48.5 dBm (D)
1 0 0 : -50.0 dBm (E)
1 0 1 : -51.5 dBm (F)
1 1 0 : -53.0 dBm (G)
1 1 1 : OFF (H)
●
Selectors 1 through 6: Compression threshold level for signals inputted via the network/
handset in the built-in TAD operation (For those models equipped with
a built-in TAD)
If voice signals inputted via the network or handset are below the level specified by these
selectors, the TAD interprets those received voice signals as no signal, compressing the re-
cording time.
●
Selector 7: Automatic dialing by caller IDs stored in the memory
This selector determines whether or not the automatic dialing function by caller IDs stored in
the memory (see the Note below) can be accessed.
If it is set to "0", caller IDs stored in the memory can be called up on the LCD by the user
function 6-7 and then pressing the START button when the desired caller ID is displayed
dials the caller automatically.
(Note: The equipment can store a maximum of the latest 30 incoming caller IDs together
with the reception date and time in the memory.)
●
Selector 8: Beep at the time of full activity report data
If this selector is set to “1,” the equipment will beep at the time of full activity report data (as
well as displaying a message on the LCD, prompting the output of the activity report).
Compression threshold level for
voice signals inputted via the
network in the built-in TAD
operation
Compression threshold level for
voice signals inputted via the
handset in the built-in TAD
operation
0: Yes 1: No 7
Automatic dialing by caller IDs
stored in the memory
Beep at the time of full activity
report data
8 0: No 1: Yes