Brother FAX-1360 User Manual Download Page 10

Page: 10 / 124

Using the

documentation

Thank you for buying a Brother machine!
Reading the documentation will help you
make the most of your machine.

Symbols and conventions
used in the documentation

The following symbols and conventions are
used throughout the documentation.

General Information

Bold

Bold typeface identifies specific
keys on the machine’s control
panel.

Italics

Italicized typeface emphasizes
an important point or refers you
to a related topic.

Courier

New

Text in the Courier New font
identifies messages on the
LCD of the machine.

Warnings tell you what to do to
prevent possible personal injury.

Electrical Hazard icons alert you to
possible electrical shock.

Cautions specify procedures you
must follow or avoid to prevent
possible damage to the machine or
other objects.

Notes tell you how you should
respond to a situation that may arise
or give tips about how the operation
works with other features.

Improper Setup icons alert you to
devices and operations that are not
compatible with the machine.

Summary of Contents for FAX-1360





























































































































Search results

Summary of Contents for FAX-1360

Reviews:

Related manuals for FAX-1360

Brands by name

Popular brands

Brother FAX-1360, User Manual

Search results

Summary of Contents for FAX-1360

Reviews:

Related manuals for FAX-1360

Brands by name

Popular brands