Brother FAX-1020E User Manual Download

Page: 40 / 118

Chapter 7

Advanced Sending

Advanced Operations

Electronic Cover Page

The cover page is sent to the receiving party’s machine. Your cover page includes the name stored
in the One Touch or Speed Dial memory, if you have used this feature to start the call.

The cover page indicates the fax is from your Station ID, and the number of pages you are sending.
If you have

COVERPG SETUP

set to

(see

Always Send Cover Page

, page 34), the number of

pages on the cover page remains blank.

You can select a comment to include on your cover page, or
you can select

1.COMMENT OFF

if you do not wish to

include a comment.

As well as using one of the comments shown on the right,
you can also enter up to two customized messages, each 27
characters long. (See

Composing Your Own Comments

page 35.)

Cover Page for Next Fax Only

Make sure Station ID is set up. (See

Setting the Station ID

, page 13.) This feature does not work

without the Station ID.

You can set the fax to send a cover page with a particular document. This cover page will include
the number of pages in your document.

Insert the document face down in the Automatic Document Feeder.

Press

Menu/Set

Press

Menu/Set

when the screen displays

NEXT FAX ONLY

Press

to select

(or

OFF

), and press

Menu/Set

Press

to view the comment selections.

Press

Menu/Set

when the screen displays your

selection.

Enter two digits to indicate the number of pages you are
sending. (Enter 00 to leave the number of pages blank.)
If you have made a mistake, press

to back up and

re-enter the number of pages.

Press

Menu/Set

. The screen displays:

Press

if you want to select additional settings. The

display returns to the Setup Send menu—

—Press

if you are finished choosing settings, and go to Step 10.

Enter the fax number you are calling and then press

Fax Start

2.PLEASE CALL

1.COMMENT OFF

3.URGENT

4.CONFIDENTIAL

2.PLEASE CALL

1.COMMENT OFF

3.URGENT

4.CONFIDENTIAL

(user defined)

ACCEPTED

1.YES 2.NO

Summary of Contents for FAX-1020E























































































































Search results

Summary of Contents for FAX-1020E

Reviews:

Related manuals for FAX-1020E

Brands by name

Popular brands

Brother FAX-1020E, User Manual

Search results

Summary of Contents for FAX-1020E

Reviews:

Related manuals for FAX-1020E

Brands by name

Popular brands