manualshive.com logo in svg

Brother E300, User Manual

Share
Download
Brother E300 User Manual Download Page 20

18

GETTING STARTED

Power Supply

AC Adapter

Use the AD-E001 (AC adapter) for this labelling system. The AD-18 or AD-24ES cannot be 

used. Connect the AC adapter directly to the P-touch.

Insert the plug on the AC adapter cord into the connector marked DC IN 12 V on the 

P-touch.

Insert the AC adapter plug into a standard electrical outlet.

Using the Rechargeable Li-ion Battery

„

Installing the Rechargeable Li-ion Battery

Open the rear cover by pressing the cover latch.

Power Supply

1

2

• Turn the P-touch off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
• When power is disconnected for more than two minutes, all text and format settings will be 

cleared. Any text files stored in the memory will also be cleared.

To safeguard and backup the labelling system’s memory, when the AC adapter is unplugged it is 

recommended to have AA-size alkaline batteries (LR6) or Ni-MH rechargeable batteries (HR6) 
installed in the labelling system.

Cover latch

Rear cover

1

Summary of Contents for E300





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands