Brother DCP-T220 User Manual Download Page 187

Page: 187 / 237

Home >

Troubleshooting

> Reset Your Machine

Reset Your Machine

The following reset functions are available.

>> Machine Reset
>> Network (DCP-T420W/DCP-T425W)
>> All Settings

Machine Reset

You can reset all the machine’s settings that you have changed, such as Date and Time.

1. Press

(

Stop

) and

Mono Start

simultaneously.

The

Power LED

Warning LED

, and

Ink LED

light up for one second, and then the

Warning LED

starts

blinking.

2. Press and hold

Mono Start

for two seconds.

The machine restarts.

Network (DCP-T420W/DCP-T425W)

Reset the print server back to its default factory settings (includes Password and IP Address information).

1. Press

WiFi Button/LED

and

(

Stop

) simultaneously.

The

Power LED

Warning LED

, and

Ink LED

light up for one second, and then the

WiFi Button/LED

starts

blinking.

2. Press and hold

Colour Start

for two seconds.

The machine restarts.

All Settings

Use this reset function to reset all machine's settings to the settings originally set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.

1. Press

(

Stop

) and

Mono Start

simultaneously.

The

Power LED

Warning LED

, and

Ink LED

light up for one second, and then the

Warning LED

starts

blinking.

2. Press and hold

Colour Start

for two seconds.

The machine restarts.

Related Information

•

Troubleshooting

183

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands