manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 177

 Home > 

Troubleshooting

 > 

If You Are Having Difficulty with Your Machine

 > Other Problems

Other Problems

>> Copying Difficulties
>> Scanning Difficulties
>> Software Difficulties

Copying Difficulties

Difficulties

Suggestions

Black marks or spots appear in
copies.

Black marks or spots on copies are typically caused by dirt or correction fluid on
the scanner glass. Clean the scanner glass and white plastic above it.
See 

Related Information

: 

Clean the Scanner

.

Copies are blank.

Make sure you are loading the document correctly.
See 

Related Information

: 

Load Documents on the Scanner Glass

.

Fit to Page does not work
correctly.

Make sure the document is not skewed on the scanner glass. Reposition the
document and try again.

Copy speed is too slow.

To copy with normal quality, briefly press 

Mono Start

 or 

Colour Start

 (do not

press and hold). If you press and hold 

Mono Start

 or 

Colour Start

 for two

seconds, the machine makes a copy of the best quality, which will take more
time.

Scanning Difficulties

Difficulties

Suggestions

TWAIN or WIA errors appear
when starting to scan. (Windows)

Make sure the Brother TWAIN or WIA driver is selected as the primary source in
your scanning application. For example, in Nuance

™

 PaperPort

™

 14SE, click

Desktop

 > 

Scan Settings

 > 

Select

 to choose the Brother TWAIN/WIA driver.

OCR does not work.

Try increasing the scanning resolution.

Software Difficulties

Difficulties

Suggestions

Cannot print.

Uninstall the drivers (Windows) and the Brother software and reinstall the latest
version of both.

“The device is busy.” appears on
the computer screen.

Make sure the machine's LEDs are not indicating any errors.

  Related Information

•

If You Are Having Difficulty with Your Machine

Related Topics:

•

Troubleshooting

•

Clean the Scanner

•

Load Documents on the Scanner Glass

•

Change the Print Options to Improve Your Print Results

 

173

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands