manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 110

 Home > 

Network

 > Supported Basic Network Features

Supported Basic Network Features

Related Models

: DCP-T420W/DCP-T425W

The print server supports various features depending on the operating system. Use this table to see which
network features and connections are supported by each operating system.

Operating Systems

Windows

Windows Server

macOS

Printing

Yes

Yes

Yes

Scanning

Yes

No

Yes

Web Based Management 

1

Yes

Yes

Yes

Status Monitor

Yes

No

No

Driver Deployment Wizard

Yes

Yes

No

1

The default password to manage this machine’s settings is located on the back of the machine and marked "

Pwd

". We recommend

immediately changing the default password to protect your machine from unauthorised access.

When connecting your machine to an outside network such as the Internet, make sure your network
environment is protected by a separate firewall or other means in order to prevent information leaks due to
inadequate settings or unauthorised access by malicious third parties.

  Related Information

•

Network

Related Topics:

•

Set or Change a Login Password for Web Based Management

 

106

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands