Brother DCP-L5500D User Manual Download Page 51

Page: 51 / 705

Home >

Paper Handling

Load Documents

> Load Documents in the Automatic Document Feeder (ADF)

Load Documents in the Automatic Document Feeder (ADF)

Use the ADF when copying or scanning multiple-page, standard-sized documents.

•

The ADF can hold the following pages and feed each sheet individually:
-

(DCP-L5500D)
up to 40 pages

(MFC-L5700DN/MFC-L5755DW)
up to 50 pages

(MFC-L5900DW/MFC-L6700DW)
up to 70 pages

(MFC-L6900DW)
up to 80 pages

•

Use standard 80 g/m

paper.

•

Make sure documents with correction fluid or written in ink are completely dry.

IMPORTANT

•

DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.

•

DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted, or taped.

•

DO NOT use cardboard, newspaper, or fabric.

•

To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.

Document Sizes Supported

Length:

147.3 to 355.6 mm

Width:

105 to 215.9 mm

Weight:

64 to 90 g/m

1. Unfold the ADF document output support flap.

2. Fan the pages well.
3. Stagger the pages of your document and load it

face up

and

top edge first

, into the ADF as shown in the

illustration.

Summary of Contents for DCP-L5500D

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-L5500D

Reviews:

Related manuals for DCP-L5500D

Brands by name

Popular brands

Brother DCP-L5500D, User Manual

Search results

Summary of Contents for DCP-L5500D

Reviews:

Related manuals for DCP-L5500D

Brands by name

Popular brands