manualshive.com logo in svg

Brother DCP-9045CDN, User Manual

Share
Download
Brother DCP-9045CDN User Manual Download Page 174

166

Interfaces

E

1

Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 
1.1 interface.

2

Third party USB ports are not supported.

PictBridge

E

Direct print feature

E

1

The data including JBIG2 image file, JPEG2000 image file and layered files are not supported.

USB

Use a USB 2.0 interface cable that is no longer than 2.0 m (6 feet).

1

 

2

LAN cable

Use an Ethernet UTP cable category 5 or greater.

Compatibility

Supports the Camera & Imaging Products Association PictBridge 
standard CIPA DC-001.

Visit http://www.cipa.jp/pictbridge for more information.

Interface

USB direct interface

Compatibility

PDF version 1.6

1

, JPEG, Exif + JPEG, PRN (created by 

DCP-9045CDN printer driver), TIFF (scanned by all Brother MFC or 
DCP models), PostScript

®

 3

 

™ (created by DCP-9045CDN 

BR-Script 3 printer driver)

Summary of Contents for DCP-9045CDN























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands