13
Windows
®
Wired Network
Windows
®
Macintosh
Wired Ne
twork
c
Choose
Wired Network Connection
(Ethernet)
, and then click
Next
.
d
When the
Firewall/AntiVirus detected
screen
appears, choose
Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended)
and click
Next
.
If you are not using the Windows
®
Firewall, see
the user’s guide for your software for
information on how to add the following
network ports:
For network scanning, add UDP port 54925.
If you still have trouble with your network
connection, add UDP ports 161 and 137.
e
The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
f
When the
On-Line Registration
screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click
Next
.
g
When the
Setup is Complete
screen appears,
make your selection, and then click
Next
.
11
Finish and restart
a
Click
Finish
to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
NOTE
To install the PS driver (BR-Script3 printer driver),
choose
Custom Install
, and then follow the
on-screen instructions.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for all
screens to appear.
NOTE
• If prompted, choose your machine from the list,
and then click
Next
.
• If your machine is not found over the network,
confirm your settings by following the on-screen
instructions.
• If there is more than one of the same model
connected on your network, the IP Address and
Node Name will be displayed to help you
identify the machine.
• You can find your machine’s IP address and the
Node Name by printing out the Network
Configuration Report (see
• If the
Windows Security
screen appears,
select the check box and click
Install
to
complete the installation correctly.
NOTE
• If an error message appears during the
software installation, do one of the following:
- For Windows
®
XP, Windows Vista
®
and
Windows
®
7 users: run the
Installation
Diagnostics
located in
(Start)
>
All Programs
>
Brother
>
DCP-XXXX LAN
(where DCP-XXXX is your model name).
- For Windows
®
8 users: to run
Installation
Diagnostics
, double-click the
(
Brother
Utilities
) icon on the desktop, and then click
the drop-down list and select your model
name (if not already selected). Click
Tools
in
the left navigation bar.
• Depending on your security settings when using
the machine or its software, a Windows
®
Security or antivirus software window may
appear. Please allow or permit the window to
continue.
