Brother dcp-9015cdw User Manual Download

Page: 30 / 171

Chapter 2

Loading paper in the manual
feed slot

You can load envelopes and special print
media one-at-a-time into this slot. Use the
manual feed slot to print or copy on labels,
envelopes, thicker paper or glossy paper (for
the recommended paper to use, see

Acceptable paper and other print media

on page 28).

NOTE

The machine turns on the Manual Feed
mode when you put paper in the manual
feed slot.

Printing on plain paper, thin paper,
recycled paper and bond paper from
the manual feed slot

Lift up the support flap (1) to prevent
paper from sliding off the face-down
output tray, or remove each page as
soon as it comes out of the machine.

Open the manual feed slot cover.

Use both hands to slide the manual feed
slot paper guides to the width of the
paper you are going to use.

Summary of Contents for dcp-9015cdw












































































































































































Search results

Summary of Contents for dcp-9015cdw

Reviews:

Related manuals for dcp-9015cdw

Brands by name

Popular brands

Brother dcp-9015cdw, User Manual

Search results

Summary of Contents for dcp-9015cdw

Reviews:

Related manuals for dcp-9015cdw

Brands by name

Popular brands