Brother DCP 585CW - Color Inkjet - All-in-One User Manual Download Page 144

Page: 144 / 199

134

Overview

This chapter explains how to print from a Macintosh

on a Network using the Simple Network Configuration

capabilities on Mac OS

X 10.2.4 or greater.

For updated information on printing from a Macintosh

, visit the Brother Solutions Center at:

http://solutions.brother.com.

How to choose the print server (TCP/IP)

For Mac OS

X 10.2.4 to 10.4.x

Turn on the machine by plugging in the power cord.

From the

menu, choose

Applications

Open the

Utilities

folder.

Double-click the

Printer Setup Utility

Icon. (Mac OS

X 10.2.x users, click the

Print Center

icon.)

Click

Add

(For Mac OS

X 10.2.4 to 10.3.x) Go to

(For Mac OS

X 10.4.x or greater) Go to

(For Mac OS

X 10.2.4 to 10.3.x) Make the following selection.

(Mac OS

X 10.2.4 - 10.3.x)

Network printing from a Macintosh

Summary of Contents for DCP 585CW - Color Inkjet - All-in-One








































































































































































































Search results

Summary of Contents for DCP 585CW - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands

Brother DCP 585CW - Color Inkjet - All-in-One, User Manual

Search results

Summary of Contents for DCP 585CW - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands