32
For Wireless Network Users
19
Manual setup from the
control panel using the
Setup Wizard
(Windows
®
, Macintosh
and mobile devices)
a
Press .
Press
Setup Wizard
.
When
Network I/F switched to
Wireless.
is displayed, press
Yes
to accept.
This will start the wireless setup wizard.
To cancel, press
No
.
b
The machine will search for available SSIDs. It
will take several seconds to display a list of
available SSIDs.
If a list of SSIDs is displayed, press
s
or
t
to
choose the SSID you wrote down in step
on page 28. Select the SSID you want to
connect with.
If the wireless access point/router of the
selected SSID supports WPS and the machine
asks to use WPS, go to
.
If the machine asks you to enter a Network
Key, go to
Otherwise, go to
c
Press
Yes
to connect your machine using
WPS. (If you choose
No
to continue manual
configuration, go to
When the Touchscreen indicates you should
start WPS, press the WPS button on your
wireless access point/router, and then press
Next
to proceed.
Go to
.
d
Enter the Network Key you wrote down in
step
on page 28 using the Touchscreen.
The letters appear in this order: lower case and
then upper case. Press
to cycle between
letters, numbers and special characters. (The
characters available may differ depending on
your country.) To move the cursor to the right,
press
c
.
(For more information, see
Press
OK
when you have entered all the
characters, then press
Yes
to apply your
settings.
e
Your machine will now try to connect to your
wireless network. It may take a few minutes.
f
A connection result message appears for
60 seconds on the Touchscreen and a WLAN
report will automatically be printed.
If the connection failed, check the error code on
the printed report and refer to
Wireless setup is now complete. The
Wi-Fi button at the upper right of the
Touchscreen changes to a four-level
indicator that displays the wireless signal
strength of your access point/router.
The Wi-Fi LED
on the control panel
lights up, indicating that the machine’s
Network I/F is set to WLAN.
To install MFL-Pro Suite, continue to
step
20
.
For Windows
®
users:
Now go to
Page 36
For Macintosh users:
Now go to
Page 39
NOTE
• If a list of SSIDs is not displayed, make sure
your access point is on. Move your machine
closer to the access point and try starting
from
again.
• If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. For details, see the
Network User’s
Guide
.
NOTE
For Mobile Device users, please go to the User’s
Guide for the application you are using (Ex.
AirPrint, Brother iPrint&Scan or other
applications) for additional details on how to use
your machine with the application. To download
the User’s Guide for the application you are using,
please go to the manuals download selection on
your model’s home page of the Brother Solutions
Center at http://solutions.brother.com/.
