Brother DCP-2537DW Service Manual Download Page 156 | Manualshive

Page: 156 / 340

background image

2-116

Confidential

4.14.2Cannot update firmware

<User Check>

• Make sure that there is no other function running.

• Turn the power switch OFF and then back ON again.

* By the above update procedure, the other models firmware can be updated to the machine.

Check that the firmware is right and update correctly. If the other models firmware was
updated by mistake, the machine may repeat power ON/OFF or not powered ON. In such
case, replace the main PCB.

4.14.3“Paper Low” message does not disappear

<User Check>

• Turn the power switch OFF and then back ON again.

• Refill the paper in the appropriate paper tray.

Step

Cause

Remedy

1

Firmware version does not
match

Reinstall the latest sub firmware and main
firmware in this order.

2

In case of update failure by
interruption, the firmware
might not correctly written in
the ROM

Update the firmware again by the following
procedure.*
1) Turn OFF the machine.
2) For touch panel models, press and hold

the

and turn the machine ON. For

non-touch panel with ten key models,
press and hold the [5] and turn the
machine ON. For non-touch panel without
ten key models, press and hold the
[Option] and turn the machine ON.

3) Double-click the “Filedg32.exe” to start,

and select “Brother Maintenance USB
Printer”.

4) Drag and drop the firmware (upd file) in

the FILEDG32 screen. Update is started.

3

Main PCB failure

Replace the main PCB ASSY.

Step

Cause

Remedy

1

Damaged plate-up plate in
the paper tray

Replace the paper tray.

2

Paper feed motor failure

Replace the paper feed motor.

3

Damaged plate push-up
mechanism in the machine

Replace the frame L unit.

4

Main PCB failure

Replace the main PCB ASSY.

«
...
154
155
156
157
158
...
»

Summary of Contents for DCP-2537DW





















































































































































































































































































































































Reviews:

No comments

Related manuals for DCP-2537DW

Brand: Panasonic Pages: 54

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 8

KX-FLB851 - All-in-One Flatbed Laser Fax

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 12

Brand: GCC Technologies Pages: 63

Brand: GCC Technologies Pages: 9

Brand: GCC Technologies Pages: 199

Brand: Xerox Pages: 4

Brand: Lexmark Pages: 455

Brand: Xerox Pages: 2

Brand: Xerox Pages: 11

Brand: Xerox Pages: 192

Brand: Xerox Pages: 10

Brand: Xerox Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands