Brother DCP-1519, User Manual

Page: 33 / 158

26
2
2
The scanning operations and drivers will be different depending on your operating system. The machine uses
a TWAIN compliant driver for scanning documents from your applications.
Two scanner drivers are installed. A Windows
®
Imaging Acquisition (WIA) driver (See Scanning a document
using the WIA driver on page 26) and a TWAIN compliant scanner driver (See Scanning a document using
the TWAIN driver on page 35).
Scanning a document using the WIA driver
2
WIA compliant
2
You can choose Windows
®
Image Acquisition (WIA) for scanning images from the machine. You can scan
images directly into any other application that supports WIA or TWAIN scanning.
Scanning a document into the PC
2
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) (for MFC models) or the scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass. (See
Pre-Scanning to crop a portion you want to scan using the scanner glass on page 28.)
a
Load your document.
b
Start the Microsoft
®
Paint application to scan a document.
NOTE
The instructions for scanning in this Guide are for when you use Microsoft
®
Paint. The scanning steps may
vary when using other software applications.
c
Click From scanner or camera on the File menu.
The Scanner Setup dialog box appears.
d
If necessary, adjust the following settings in the Scanner Setup dialog box:
 Paper source (1)
 Picture type (2)
 Adjust the quality of the scanned picture (3)
 Page size (4)
 Preview (5)
 Scan (6)
Scanning
2