Brother CPS5XVY, Operation Manual

Page: 62 / 198

SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
60
Automatically cutting the
thread
The sewing machine can be set to automatically cut
the threads at the end of the stitching. This is called
“programmed thread-cutting”. If programmed thread-
cutting is set, automatic reverse/reinforcement
stitching is also set.
a
Turn on the sewing machine.
X
The LCD comes on.
b
Select a stitch.
• For details on selecting a stitch, refer to
“Selecting stitching” (page 49).
c
Press on the screen.
X
You get , and the sewing machine is
set for programmed thread-cutting and
automatic reverse/reinforcement stitching.
• To turn programmed thread cutting off, press
.
d
Set the fabric in place, and press (“Start/
Stop” button) once.
a “Start/Stop” button
X
Stitching starts after reverse stitching or
reinforcement stitching.
e
Once you have reached the end of the
stitching, press
(“Reverse/Reinforcement
Stitch” button) once.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
X
After the reverse stitching or reinforcement
stitching has been done, the sewing machine
stops, and the thread is cut.
Memo
z
Reverse/reinforcement stitches WILL NOT
be sewing and the thread will not
automatically be cut until
(“Reverse/
Reinforcement Stitch” button) is pressed.
(“Start/Stop” button) may be pressed to
stop stitching when needed such as for
pivoting corners.
z
If the power is turned off, programmed
thread-cutting will be turned off.
1
The thread is cut here.