Brother CE-8080PRW, Service Manual

Page: 45 / 196

2 - 30
Basics of Assembly Main parts
1
Attachment of Front cover assy
1. Lower the presser lever
1
.
2. Connect the connectors of the SSVR PCB assy.
2
and the operation PCB
sub assy.
3
to the main PCB assy.
4
, and hang the lead wire on the guide
part of the shutter cover
5
.
*Key point
• Refer to "Special Instructions of Wiring".
3. Set the front cover assy. to the rear cover assy., and then secure them with
the screw
1
(from the front cover side) and the 2 screws
2
, the 5 screws
3
and the screw
4
(from the rear cover side).
→
Refer to 3 - 47 "Assembly of Front cover assy".
1
Torque
0.78 – 1.18 N·m
2
Torque
0.78 – 1.18 N·m
3
Torque
1.18 – 1.57 N·m
4
Torque
0.78 – 1.18 N·m
2
4
3 2 5
1
4
3
1
Giza Tite
M4X12
Giza Tite
M4X25
Giza Tite
M5X18
Screw, Pan (S/P washer)
M4X8