Brother BL6200, Service Manual

Page: 67 / 68

- 65 -
<
TEST MODE (Language/Machine Specifications Settings)
>
This Test Mode is used to switch the language in which LCD displays appear, and to switch the machine
specifications.
Setting the Test Mode
1. Turn off the power supply.
2. Lower the BH lever.
3. Turn on the power supply while holding down both the
↑
and A
keys on the display panel to enter the Test Mode. The LCD
display will appear as shown in Figure 1.
Setting the Language
1. Press either the A key (forward sequence) or the B key (reverse sequence) until the desired language is
displayed on the LCD.
Setting the Machine Specifications
The teaching contents displayed on the LCD are determined by three possible combinations: 1 ) whether or
not there is a zigzag manual dial; 2) whether or not there is a Drop Feed function; and 3) the construction and
operation of the bobbin case (CB hook or Top bobbin).
1. Press
the
↓
key (forward sequence) or the
↑
key (reverse sequence) to set the desired specifications.
When all of the settings have been completed, turn off the power supply to cancel the Test Mode.
1) ENGLISH 9) SUOMEKSI (FINNISH)
2) DEUTSCH (GERMAN) 10) SVENSK (SWEDISH)
3) FRANCAIS (FRENCH) 11) CESTINA (CZECH)
4) ITALIANO (ITALIAN) 12) SLOWAKIAN (SLOVAK)
5) NEDERLANDS (DUTCH) 13) MAGYAR (HUNGARIAN)
6) ESPANOL (SPANISH) 14) SLOVENSKO (SLOVENE)
7) DANSK (DANISH) 15) PORTUGUES (PORT.)
8) NORSK (NORWEGIAN) 16) (JAPANESE)
<
Table of Language Specifications
>
Zigzag Dial Drop Feed Lever Bobbin Operation Display
NO NO CB hook 1) Z-X : D-X : V
NO YES CB hook 2) Z-X : D-O : V
YES NO CB hook 3) Z-O : D-X : V
YES YES CB hook 4) Z-O : D-O : V
NO NO Top bobbin 5) Z-X : D-X : H
NO YES Top bobbin 6) Z-X : D-O : H
YES NO Top bobbin 7) Z-O : D-X : H
YES YES Top bobbin 8) Z-O : D-O : H
<
Table of Machine Specifications
>