BES-1230AC
SETTING THE ROTATE, MIRROR, REPEAT
START
EDIT
Set STR_P. Co. # #
N_No. # # # # # # # # #
After loading your design and at the
display below, do the following.
EDIT
END
To enter EDIT mode.
To select which option you wish
to change.
To enter that options EDIT
values.
To change the values of the
option you choose
To EXIT the edit mode
To return to the above display
with changes in effect.
ERASING A STORED DESIGN FROM MEMORY
ENTER
CLEAR
Press CLEAR to delete the design
from machine memory.
Use BACK and FORWARD keys
to pick a design from memory.
Press ENTER to view design name
END
Press END to return to
“FileNo” screen
SETTING HOOP FEED POSITION
HOOP
FEED
HOOP
FEED
Press HOOP FEED to move the frame to
the current HOOP FEED position
If you wish to change the position
Use the ARROW keys to move the frame
to a new position
Press HOOP FEED to toggle between
sewing position and hoop feed position
ENTER
Press ENTER to store the new HOOP
FEED position
MOVING THE NEEDLE CASE
NEEDLE
SELECT
END
To enter the NEEDLE
SELECT mode
Use numeric keypad to select
the needle to move to.
To EXIT the NEEDLE SELECT
mode
ERASE ALL DESIGNS / HARD RESET
Turn the power OFF on the machine.
Press and HOLD the CLEAR key
while turning the power ON
The machine will continue to start
up as usual. You will notice that there
are no designs in memory.
The machine will continue the power up sequence.
“FLOATING” THROUGH A DESIGN
R_St: # # # # # # # # # Co. # #
N_No. # # # # # # # #
To move through a design after you have started
sewing you must first STOP the machine.
MODE
Press “MODE” to display a “J” in
the gray box
To move by 100 stitches either
FORWARD or BACK in design
MODE
Press “MODE” again to display a
“C” in the gray box
To move by color changes either
FORWARD or BACK in design
Press “MODE” again to display a
“T” in the gray box
To move BACK only to the first stitch
of the design
#
Press “#” To display a “I” in the gray
box
To move the frame in small increments
to correct registration
BACK FORWARD
MODE
BACK FORWARD
BACK FORWARD
BACK FORWARD
CLEAR
BACK FORWARD
1
9
~
0 = Needle Number 10
*
= Needle Number 11
#
= Needle Number 12
MODE
FO/SB - 2000/1 - 002
